Enjoy the visual silence with functional TV furniture.
Enjoy your high-resolution TV and crisp surround sound without the clutter of cables, remote controls, and other electronic devices and accessories. Store it away in a classic, beautiful solution designed to suit your needs. Design your own or choose from several standard models with depths of 30 and 38 cm, available in 41 colours.
The series is certified with the Danish Indoor Climate label and the official EU Ecolabel.
Designer: Peter J. Lassen
About the series
With Montana TV & Sound, you can create the optimum storage solution for electronic and hi-fi equipment. The series conceals cables, set-top boxes and other electronic devices. Choose from 24 pre-configurated different models that vary in size and solution in all of Montana's 41 lacquer colours.
When creating storage for electronics, bear in mind that the internal dimensions behind the retractable door are 33.8 cm for modules of depth 38 cm and 25.8 cm for modules of depth 30 cm. The series can carry evenly distributed loads of up to 40 kg. The maximum load for the module top is 20 kg.
EU Ecolabel certified
A label of environmental excellence that focuses on a product's entire lifecycle, from raw material extraction to production, distribution and disposal.
Made in Denmark
Since 1982, Montana has been designed and manufactured in Denmark by skilled craftsmen on a high-technological production site.
10 year guarantee
Montana is a buy for life product that is known to be passed on from generation to generation. However, we have your back in the unlikely case your purchase is flawed.
The Montana TV & Sound modules are fitted with perforated retractable doors or fronts that make it possible to operate electronic equipment through the closed door and provides better air circulation around the devices.
The retractable doors discreetly hides the electronic equipment. The door has a perforated steel front lacquered in Montana's lacquer colours. The door has no handles; to open, push lightly at the bottom and slide it up under the top of the unit. The perforated retractable door makes it possible to operate electronic equipment through the closed door, and provides better air circulation around the hi-fi devices. Shelves above, below and between retractable doors are fixed. When the retractable door is open, it takes up 3.2 cm from the inside top down into the module.
The perforated fronts can be detached from the shelves by giving them a gentle push. Perforated fronts are integrated into a single unit or in combination with shelves/dividers. Perforated fronts are available in 4 sizes and can be mounted either portrait or landscape. The *8 x *6, *6 x *4 and *4 x *2 perforated fronts are ready for loudspeakers to be installed. The perforated fronts are made for loudspeakers manufactured by Pointsource Acoustics. Loudspeakers from any other manufacturer can also be used.
Perforated fronts are available in steel, powder-coated in Montana colours. Sound units with perforated fronts ready for loudspeakers have slots for cabling at the rear. A rear cut-out for cable routing must be selected to go behind the *6 x *2 perforated front.
Cabling and slots
The back panels of the TV-modules are fitted with a round slot for a cable grommet to connect the unit to the power socket. The shelf has a slot for cabling between equipment into the unit.
The TV & Sound units are available with legs, castors, plinth and suspension rails for mounting on the wall. When wall-mounted, sound modules in all widths should be calculated with two OP12 suspension rails. The suspension rail is available in a thickness of 12 mm or 16 mm depending on cable thickness, allowing cables to be run behind the units. Please make sure to choose Sound suspension rails for all units, when combining with TV & Sound units, so the distance from the wall is the same.
VI17, VI17 and VI19 TV & Sound modules have a lacquered SS10 support rail mounted under the base when selected with a suspension rail. Support rail SS10 should be fitted under any additional shelves and tops for a load of more than 3 kg. Shelves/unit tops can withstand a load of max. 10 kg with a support rail. The support rail comes in the same colours as the shelving unit.
Adapt the TV & Sound units to personal needs with additional components including cable tracks, doors, drawers and suspension rails. A Montana retailer can guide you through the different possibilities and help you create a solution that fits your specific needs.